Brecon Vintage Oak Herringbone

Wood Design | Deep Emboss Matt

Brecon Vintage Oak Herringbone

Wood Design | Deep Emboss Matt

Out of stock

SKU: 29-BRE-018v1

£53 per m²£76.32 per pack (1.44m2 per pack)

Out of stock

X

OR

brecon-vintage-oak-herringbone-wood-design

Brecon Vintage Oak Herringbone

The stylish sophistication of parquet in a high-tech board with a classic look - rich in red oak tones and rustic personality, capturing the vibrant character of antique wood. Brecon Vintage Oak is a lavish herringbone floor that's waterproof and has built-in underlay. Also available in matching plank. For stock availability, please contact us directly.

Additional information

Pack Size

1.44m²

Bevels on Edges

Micro Bevel All 4 Edges

Core Material

Natural Mineral / Resin Composite

Finish

Deep Emboss Matt

Fitting Method

Floated

Floor Colour

Natural

Floor Joint

Easiloc

Floor Thickness

6mm

Floor Type

Wood Design Flooring

Hardness

Hard

Length

600mm

Planks per Pack

10

Tog Rating

0.5

Underfloor Heating

Suitable

Width

120mm

WOOD FLOORING FAQS

These are the questions we get asked most often about our floors and their features.

Does my Brecon floor need to acclimatise before installing?

Yes – We recommend you let your Brecon floor acclimatise for at least 24 hours before installing. This needs to be in the same room that it will be installed in, and it needs to remain within the sealed packaging. The sealed packaging helps ensure the floor doesn’t warp with the change of temperature from different environments. Do not store the flooring outdoors, in an outbuilding, or anywhere with damp or condensation problems.

What condition should the subfloor be in?

The surface immediately beneath a Woodpecker floor must be in good structural condition, free from damp rot, fungal or insect infestation, and contaminating residues. It must be flat with uneven areas not exceeding 3mm over a 2m area. Naturally, the surface should be vacuumed and totally free of debris before fitting begins. Hot pipes should be well insulated to prevent localised hotspots, which can cause Brecon flooring to distort.

Do I need to leave an expansion gap for my Brecon floor?

Not in normal living conditions (temperatures of 15-25°C). However, allow a gap of 2-3mm for Brecon floors where there is likely to be temperature variation beyond normal living conditions. Eg. conservatories

How do I clean my Brecon floor?

Our cleaning kits for lacquered floors are suitable for your Brecon floor to keep them shining, alternatively use a well wrung damp mop.

My Brecon floor has a scratch, how can I repair it?

The best way to conceal small scratches and marks on our Brecon range is with Scratchfix – a quick and easy method to restore scratches on resilient floors.

Do I need additional underlay with my Brecon floor?

No – Brecon floors have built-in underlay therefore additional underlay should not be used. This can create additional bounce which can damage the joints. If you need to raise the height of the floor then we recommend using plywood.

Is Brecon wood-effect or real wood?

Brecon is wood-effect flooring and as a result, it is waterproof. It has a stable mineral composite core and a resilient and slip-resistant vinyl.

Can I use Brecon flooring in a wet room?

No – Whilst Brecon is waterproof, long exposure to continuous water is not recommended, therefore bathrooms are fine but wet rooms would not be suitable.

Can I use this floor with underfloor heating?

Yes – You can use this floor with underfloor heating.

What type of joint does this floor have?

This floor has easiloc/click-joints.

How can this floor be laid?

This floor should only be floated.

What is the wear rating for Brecon flooring?

The wear rating for Brecon is AC4.

What slip resistance rating does Brecon have?

Brecon has a slip resistance of R10.

How thick is Brecon flooring?

Brecon is 6mm thick.