Design Panels

Engineered Wood | Hardwax Oiled

Design Panels

Engineered Wood | Hardwax Oiled

Out of stock

SKU: DESIGN-PANELS

From: £250/m²From: £140.00 per pack (0.56) per pack

X

OR

highgrove-limed-oak-design-panels-woodpecker

Design Panels

Our luxurious new range of Engineered Design Panels are inspired by 17th Century France and make a classic & elegant design statement in any room. Each panel is 750x750mm in size and 15mm thick. We're proud to offer 2 exquisite panel patterns in 3 unique stains, plus a choice of bevels. All of our Design Panels come with our impressive Woodpecker 100-year guarantee. *As our Design Panels are handcrafted to order, please allow up to 8 weeks for delivery.   

Additional information

Bevel

Multi-Micro Bevel

Core Material

Oak

Finish

Hardwax Oiled

Fitting Method

Glued

Floor Grade

Rustic

Floor Joint

Tongue & Groove

Floor Thickness

15mm

Floor Type

Real Wood Engineered

Hardness

Hard

Length

750x750mm

Pack Size

0.56m2

Planks per Pack

1

Species

Oak

Tog Rating

1.13

Underfloor Heating

Suitable if Glued Down

Wear layer

4mm

Floor Features

Hand-crafted

WOOD FLOORING FAQS

These are the questions we get asked most often about our floors and their features.

Can I have underfloor heating with these Design Panels?

Yes – You can have underfloor heating with our Design Panels.

How can these Design Panels be laid?

These should be laid by fully glueing them down only.

How long should the Design Panels acclimatise for?

We recommend you let your Design Panels acclimatise for 3 to 4 days before installing. This needs to be in the same room that it will be installed in, and it needs to remain within the sealed packaging. The sealed packaging helps ensure the floor doesn’t warp with the change of temperature from different environments. Do not store the flooring outdoors, in an outbuilding, or anywhere with damp or condensation problems.

What condition should the subfloor be in?

The surface immediately beneath a Woodpecker natural wood floor must be in good structural condition, free from damp rot, fungal or insect infestation, and contaminating residues. It must be flat with uneven areas not exceeding 3mm over a 2m area. Naturally, the surface should be vacuumed and totally free of debris before fitting begins. Hot pipes should be well insulated to prevent localised hotspots, which can cause wood flooring to warp or shrink.

How do I clean the Design Panels?

Our Design Panels can be cleaned using our specially formulated cleaning liquid for oiled floors. Alternatively, use a well-wrung mop (water only). We do not recommend using a steam mop or any other solutions on our floors.

What joints do the Design Panels have?

Our Design Panels have tongue and groove joints.

How thick are the Design Panels?

We generally wouldn’t recommend using engineered flooring in a bathroom.

How long does it take for Design Panels to arrive?

Please allow up to 8 weeks for Design Panels to be delivered, this is because each board is painstakingly hand-crafted to order.

Do I need to leave expansion gaps with Design Panels?

As wood is a natural substance, it will expand and contract with changes in temperature and humidity. That’s why when a wood floor is fitted, expansion gaps need to be left wherever the boards meet a wall, structural support, stairs, breakfast bar, fireplace, central heating pipe…etc. Gaps must also be considered at doorways to allow for the differing expansion between rooms. Place spacers at regular intervals when fitting and then remove them before skirting boards, beading or trims are put in place. Allow a 2mm gap for every metre span of the floor with a minimum of 10-15mm gap regardless. For areas over 5m in width, extra provisions should be made for expansion.

How do I clean this oiled floor?

Our Design Panels can be cleaned using our specially formulated cleaning liquid for oiled floors. Alternatively, use a well-wrung mop (water only). We do not recommend using a steam mop or any other solutions on our floors.