Chepstow Washed Oak | Outlet

Engineered Wood | Oiled

Chepstow Washed Oak | Outlet

Engineered Wood | Oiled

119 in stock

SKU: 65-RWA-001 / 65-RWA-002

£80.4 per m²£116.11 per pack (1.444, 2.11m2 per pack)

119 in stock

X

OR

Chepstow Washed Oak

Chepstow Washed Oak | Outlet

Full of whirling natural details, the subtle pale wash on this oak floor brings out the delicate grey hues and golden undertones. Treated with 6 coats of oil to protect the surface, it also penetrates the wood and enhances the structure of the grain. This flooring comes with a 100-year warranty.

Additional information

Pack Size

1.444m², 2.11m²

Bevels on Edges

All 4 edges

Core Material

Plywood

Finish

Oiled

Fitting Method

Floated, Glued, Nailed

Floor Colour

Greige, Natural

Floor Joint

Tongue & Groove

Floor Grade

Rustic

Floor Thickness

21mm

Floor Type

Real Wood Engineered

Hardness

Hard

Length

1900mm

Planks per Pack

6

Species

Oak

Tog Rating

1.2

Underfloor Heating

Suitable if Glued Down

Wear layer

6mm

Width

190mm, 240mm

Option

Chepstow Washed Oak (190mm), Chepstow Washed Oak (240mm)

WOOD FLOORING FAQS

These are the questions we get asked most often about our floors and their features.

How do I clean this Chepstow floor?

To clean this oiled floor, simply use our specially formulated cleaning liquid for oiled floors. Alternatively, use a well-wrung mop (water only). We do not recommend using a steam mop or any other solutions on our floors.

Does Chepstow flooring need to acclimatise before installing?

Yes – We recommend you let your Chepstow floor acclimatise for 3 to 4 days before installing. This needs to be in the same room that it will be installed in, and it needs to remain within the sealed packaging. The sealed packaging helps ensure the floor doesn’t warp with the change of temperature from different environments. Do not store the flooring outdoors, in an outbuilding, or anywhere with damp or condensation problems.

What condition should the subfloor be in?

The surface immediately beneath a Woodpecker natural wood floor must be in good structural condition, free from damp rot, fungal or insect infestation, and contaminating residues. It must be flat with uneven areas not exceeding 3mm over a 2m area. Naturally, the surface should be vacuumed and totally free of debris before fitting begins. Hot pipes should be well insulated to prevent localised hotspots, which can cause wood flooring to warp or shrink.

What expansion gaps does Chepstow need?

As wood is a natural substance, it will expand and contract with changes in temperature and humidity. That’s why when a wood floor is fitted, expansion gaps need to be left wherever the boards meet a wall, structural support, stairs, breakfast bar, fireplace, central heating pipe…etc. Gaps must also be considered at doorways to allow for the differing expansion between rooms. Place spacers at regular intervals when fitting and then remove them before skirting boards, beading or trims are put in place. Allow a 2mm gap for every metre span of the floor with a minimum of 10-15mm gap regardless. For areas over 5m in width, extra provisions should be made for expansion.

Is Chepstow flooring suitable for underfloor heating?

Yes – but only if it is fully stuck down.

How can I install Chepstow flooring?

You can float, glue or secret nail Chepstow flooring.

What is colour variation and how should I lay the planks with colour variation?

Colour variation is the natural beauty and variations in colour that occur in real wood. To ensure the overall effect has a good balance of colour and details, take care to blend planks from several packs across the entire room.

What type of joints does Chepstow have?

Chepstow flooring has tongue and groove joints.

Can I use Chepstow flooring in a bathroom?

We generally wouldn’t recommend using engineered flooring in a bathroom.

How much should I allow for wastage?

We generally recommend 10% wastage, however, this can be impacted by the room shape, laying style and other factors so always check with your installer first.