Harlech Raw Oak

Engineered Wood | Brushed and Matt Lacquered

Harlech Raw Oak

Engineered Wood | Brushed and Matt Lacquered

SKU: 35-HRA-001 / 35-HRA-240

From: £98/m² - £121/m²From: £212.27£255.31 per pack (2.11, 2.166) per pack

X

OR

harlech-raw-oak-flooring

Harlech Raw Oak

Harlech Raw Oak has the perfect combination of pale, pared-back, and rustic details, which makes this floor a seemingly effortless design. Every board features the beauty of the wood's natural character in a subtle shade that feels fresh from the forest. Brushed and matt lacquered to enhance the natural grain and tones, this engineered board is also available in a premium 240mm width as part of our Legacy range.

Additional information

Bevels on Edges

All 4 edges

Core Material

Softwood

Finish

Brushed & Matt Lacquered

Fitting Method

Floated, Glued, Nailed

Floor Colour

Light

Floor Grade

Rustic

Floor Joint

Tongue & Groove

Floor Thickness

15mm

Floor Type

Real Wood Engineered

Hardness

Hard

Length

1900mm, 2200mm

Pack Size

2.11m², 2.166m²

Planks per Pack

4, 6

Species

Oak

Tog Rating

1.13

Underfloor Heating

Suitable if Glued Down

Wear layer

4mm

Width

190mm, 240mm

WOOD FLOORING FAQS

These are the questions we get asked most often about our floors and their features.

How do I clean this Harlech floor?

To clean this Harlech lacquered floor, simply use our specially formulated cleaning liquid for lacquered floors. Alternatively, use a well-wrung mop (water only). We do not recommend using a steam mop or any other solutions on our floors.

Does my Harlech floor need to acclimatise before installing?

Yes – We recommend you let your Harlech floor acclimatise for 3 to 4 days before installing. This needs to be in the same room that it will be installed in, and it needs to remain within the sealed packaging. The sealed packaging helps ensure the floor doesn’t warp with the change of temperature from different environments. Do not store the flooring outdoors, in an outbuilding, or anywhere with damp or condensation problems.

How much wastage do I need?

We generally recommend 10% wastage, however, this can be impacted by the room shape, laying style and other factors so always check with your installer first.

What condition should the subfloor be in?

The surface immediately beneath a Woodpecker natural wood floor must be in good structural condition, free from damp rot, fungal or insect infestation, and contaminating residues. It must be flat with uneven areas not exceeding 3mm over a 2m area. Naturally, the surface should be vacuumed and totally free of debris before fitting begins. Hot pipes should be well insulated to prevent localised hotspots, which can cause wood flooring to warp or shrink.

What is colour variation and how should I lay the planks with colour variation?

Colour variation is the natural beauty and variations in colour that occur in real wood.  To ensure the overall effect has a good balance of colour and details, take care to blend planks from several packs across the entire room.

What type of joints does Harlech have?

Harlech has tongue and groove joints.

What expansion gaps does Harlech flooring need?

As wood is a natural substance, it will expand and contract with changes in temperature and humidity. That’s why when a wood floor is fitted, expansion gaps need to be left wherever the boards meet a wall, structural support, stairs, breakfast bar, fireplace, central heating pipe…etc. Gaps must also be considered at doorways to allow for the differing expansion between rooms. Place spacers at regular intervals when fitting and then remove them before skirting boards, beading or trims are put in place. Allow a 2mm gap for every metre span of the floor with a minimum of 10-15mm gap regardless. For areas over 5m in width, extra provisions should be made for expansion.

How can Harlech flooring be installed?

Harlech flooring can either be floated, secret nailed or glued.

Can I have underfloor heating with Harlech flooring?

Yes – Harlech is suitable for underfloor heating but only if it is fully stuck down.

How thick is Harlech flooring

Harlech flooring is 15mm thick with a 4mm real oak wear layer.

What does 'pack includes cut lengths' mean?

This means that at least one plank within your pack will be cut in half. This is intentional as it will help spread the joints out across your floor, thus helping prevent weakening. The other planks will be the same length.

Can I use Harlech flooring in my bathroom?

We generally wouldn’t recommend using engineered flooring in a bathroom.