W by Woodpecker Hollow Oak | Outlet
Bring the comforting feel of nature indoors with these lovely earthy tones and organic accents. All our W by Woodpecker floors come with a 10-year warranty. For stock availability, please contact us directly.
W by Woodpecker Hollow Oak | Outlet
Wood Design | Smooth Embossed
W by Woodpecker Hollow Oak | Outlet
Wood Design | Smooth Embossed
1 in stock
SKU: 86-HOZ-001
£34.43 per m²£60.94 per pack (1.77m2 per pack)
1 in stock
Additional information
| Bevels on Edges | Micro Bevel All 4 Edges |
|---|---|
| Core Material | Natural Mineral / Resin Composite |
| Finish | Smooth Embossed |
| Fitting Method | Floated |
| Floor Colour | Grey |
| Floor Joint | Easiloc |
| Floor Thickness | 6mm |
| Hardness | Hard |
| Length | 1180mm |
| Pack Size | 1.77m2 |
| Planks per Pack | 10 |
| Tog Rating | 0.5 |
| Underfloor Heating | Suitable |
| Width | 150mm |
| Floor Type | Wood Design Flooring |
Stratex® Flooring FAQS
These are the questions we get asked most often about our floors and their features.
Does my W by Woodpecker floor need to acclimatise before installing?
Yes – We recommend you let your W by Woodpecker floor acclimatise for at least 24 hours before installing. This needs to be in the same room that it will be installed in, and it needs to remain within the sealed packaging. The sealed packaging helps ensure the floor doesn’t warp with the change of temperature from different environments. Do not store the flooring outdoors, in an outbuilding, or anywhere with damp or condensation problems.
What condition should the subfloor be in?
The surface immediately beneath a Woodpecker floor must be in good structural condition, free from damp rot, fungal or insect infestation, and contaminating residues. It must be flat with uneven areas not exceeding 3mm over a 2m area. Naturally, the surface should be vacuumed and totally free of debris before fitting begins. Hot pipes should be well insulated to prevent localised hotspots, which can cause W by Woodpecker flooring to distort.
Do I need to leave an expansion gap for my floor?
Not in normal living conditions (temperatures of 15-25°C). However, allow a gap of 2-3mm for W by Woodpecker floors where there is likely to be temperature variation beyond normal living conditions. Eg. Conservatories.
How do I clean my W by Woodpecker floor?
Our cleaning kits for lacquered floors are suitable for your W by Woodpecker floor to keep them shining, alternatively use a well wrung damp mop.
My W by Woodpecker floor has a scratch, how can I repair it?
The best way to conceal small scratches and marks on our W by Woodpecker range is with Scratchfix – a quick and easy method to restore scratches on resilient floors.
Do I need additional underlay with my W by Woodpecker floor?
No – W by Woodpecker floors have built-in underlay therefore additional underlay should not be used. This can create additional bounce which can damage the joints. If you need to raise the height of the floor, then we recommend using plywood.
Is W by Woodpecker wood-effect or real wood?
W by Woodpecker is wood-effect flooring and as a result, it is waterproof. It has a stable mineral composite core and a resilient and slip-resistant vinyl.
Can I use W by Woodpecker flooring in a wet room?
No – Whilst W by Woodpecker is waterproof, long exposure to continuous water is not recommended, therefore bathrooms are fine but wet rooms would not be suitable.
Can I use this floor with underfloor heating?
Yes – You can use this floor with underfloor heating.
What type of joint does this floor have?
This floor has Easiloc/click-joints.
How can this floor be laid?
This floor should only be floated.
What is the wear rating for Weymouth flooring?
The wear rating for W by Woodpecker is AC4.
What slip resistance rating does W by Woodpecker have?
W by Woodpecker has a slip resistance of R10.
How thick is W by Woodpecker flooring?
W by Woodpecker is 6mm thick.
